---
title: "Grid 06: Battle Ready"
description: "In this tutorial we'll finally get the grid battle ready. This tutorial is part 6 of a mini-series covering grid battles. You can find the start of this series [here](https://orkframework.com/guide/ork4/ork4-tutorials/ork4-gameplay-tutorials/ork4-grid-01-battle-grid-setup/). We've got our grid, but we still need to make…"
url: "https://orkframework.com/guide/ork4/ork4-tutorials/ork4-battle-tutorials/ork4-grid-06-battle-ready/"
updated: "2026-08-30"
category: ORK 4 Tutorials / Battle Tutorials
---

# Grid 06: Battle Ready

In this tutorial we'll finally get the grid battle ready.

This tutorial is part 6 of a mini-series covering grid battles. You can find the start of this series [here](https://orkframework.com/guide/ork4/ork4-tutorials/ork4-gameplay-tutorials/ork4-grid-01-battle-grid-setup/).

We've got our grid, but we still need to make it work. Beside a battle start schematic that uses our grid and starts the player placement selection, we also need to add the grid move command to the battle menu and battle AI, and show the available move range in the player HUD.

We'll set up:

- battle start schematic for grids (and using it in the phase battle system)
- updating action start/end animations
- adding a move range HUD (optional)

This tutorial is based on the [ORK 4 Unity Quickstart 3D tutorials](https://orkframework.com/guide/ork4/ork4-tutorials/ork4-unity-quickstart-tutorials-3d/ork-4-unity-quickstart-3d/) and using a [phase battle system](https://orkframework.com/guide/ork4/ork4-tutorials/ork4-gameplay-tutorials/ork4-adding-phase-battles/), but can be used in any project and with any battle system.

# Grid Battle Start Schematic

When a battle takes place in the same scene as it starts, it can automatically use a nearby or defined grid - but our battles start in a different scene, so we'll have to search for the grid after we load into the scene.

We'll also initiate the player's grid placement selection to let the player decide where to place the player group members.

Instead of creating a new schematic from scratch, we'll make use of the regular *BattleStart* schematic we've set up in the quickstart 3D tutorials and save it as a new schematic.

Open the schematic editor and open the *BattleStart* schematic, the schematic currently looks like this:

[![](https://orkframework.com/wp-content/uploads/ork4_tutorials_unity_quickstart_3d__battle_start_schematic.png)](https://orkframework.com/wp-content/uploads/ork4_tutorials_unity_quickstart_3d__battle_start_schematic.png)

The new version will look like this:

[![](https://orkframework.com/wp-content/uploads/ork4_tutorials_gameplay__battle_start_grid_schematic.png)](https://orkframework.com/wp-content/uploads/ork4_tutorials_gameplay__battle_start_grid_schematic.png)

## Settings

We'll change the added actor - we don't need the battle arena, but we need the enemies that are part of the battle.

### Actors > Actor 0

- **Actor Type**
   Select: *Enemies (Battle)*

## Place At Spots

We don't use battle spots in grid battles.

Remove this node, we'll replace it with 4 other nodes.

## Set Battle Grid

*Add Node > Battle > Grid > Set Battle Grid*

This node is used to set a battle's grid. We'll put it where the *Place At Spots* node was, i.e. the *Load Scene* node's *Next* slot connects to this node.

- **Grid Use Type**
   Select: *Nearest*

## Show Battle Grid

*Add Node > Battle > Grid > Show Battle Grid*

This node is used to show or hide the battle grid. Since we've set our grids to not show automatically, we'll need to show it manually.

- **Show/Hide**
   *Enable*

## Destroy Player

*Add Node > Game > Player > Destroy Player*

This node is used to destroy the player's object or all spawned combatants of the player group.

Since our scene transition also keeps the player group objects alive, we'll destroy them. We're going to use grid placement to let the player decide where to place the combatants on the grid.

Without destroying the player, it'd just awkwardly stand around somewhere.

- **Whole Group**
   *Enable*
   In case you've followed the [player group spawn tutorial](https://orkframework.com/guide/ork4/ork4-tutorials/ork4-gameplay-tutorials/ork4-player-group-spawn-and-follow/), this'll make sure the entire player group objects will be destroyed.

## Place On Grid

*Add Node > Battle > Spawn > Place On Grid*

Add this node between *Set Battle Grid* node and *Spawn Battle Combatants* node.

This node will place the already spawned combatants on the grid.

This node's *Next* slot will connect to the *Spawn Battle Combatants* node.

- **Use Deployment Cells**
   *Enable*
- **Place All**
   *Enable*
- **Object (Group)**
   Select: *Actor 0*

## Spawn Battle Combatants

We'll only spawn the enemies using the changed actor.

- **Spawn All**
   *Disable*
- **Object (Group)**
   Select: *Actor 0*

## Camera Control Target

Since the actor changed (now being the enemies), we'll also change the camera to use the machine object.

This'll place it where the battle spawns in the scene, and that's also where the player deployment cells are.

- **Object (Target Object)**
   Select: *Machine Object*

## Player Grid Placement

*Add Node > Battle > Spawn > Player Grid Placement*

This node starts the player's grid placement selection.

Add it at the end of the schematic, i.e. the *Fade Screen* node's *Next* slot connects to this node.

No further settings needed in this node.

## Change Game State

Move the *Change Game State* node to the end of the schematic (*Success* slot of the *Player Grid Placement* node).

We'll show the battle HUD after the player placed the combatants.

## Save As New Schematic

And that's it - click on *Save Schematic As ...* to save it as a new schematic and name it *BattleStartGrid*.

# Updating Phase Battle System

I'm using the phase battle system setup for the grid battles - if you use a different battle system, make the following changes in your battle system's settings.

Open the ORK editor, navigate to **Battles > Battle System** and select the *Phase* battle system.

## Base Settings > Battle Start/End Schematics

We'll simply change the battle start schematic.

- **Start Schematic**
   Select: *BattleStartGrid*

## Save Changes

And that's it for now.

Don't forget to save your changes by clicking on *Save Settings* at the bottom of the editor.

# Testing

With the battle start schematic set up, we can finally test our first grid battle.

Hit play and start a battle.

 [https://orkframework.com/wp-content/uploads/ork4_tutorials_gameplay__battle_grid_demo.mp4](https://orkframework.com/wp-content/uploads/ork4_tutorials_gameplay__battle_grid_demo.mp4)

We've got a working grid battle!

But there are still some things to handle.

# Updating Action Start/End Animations

If you've noticed during battle, using abilities or items will have the user first take a step forward before the action, and move back after the action.

This was set up in the quickstart 3D tutorials using the start and end animations for abilities and items. While this works great for the regular arena-style battles, on battle grids that doesn't look that good.

So, let's change this and only use them in non-grid battles.

## New Start Animation Schematic

Additionally, we'll set up a new schematic that'll rotate toward the target (on the grid) instead.

Open the schematic editor.

[![](https://orkframework.com/wp-content/uploads/ork4_tutorials_gameplay__grid_rotate_to_target_schematic.png)](https://orkframework.com/wp-content/uploads/ork4_tutorials_gameplay__grid_rotate_to_target_schematic.png)

### Grid Rotate To Target

*Add Node > Battle > Grid > Grid Rotate To Target*

This node is used to rotate an object toward another object and limiting the rotation to grid directions.

- **Object (User)**
   Select: *Machine Object*
- **Object (Target)**
   Select: *Starting Object*
- **Use Nearest**
   *Enable*
   In case multiple combatants are targeted, we'll use the nearest one to the user.

And that's it for the schematic - click on *Save Schematic* and save it as *GridRotateToTarget*.

## Updating the Settings

Open the ORK editor and navigate to **Battles > Battle Actions**.

### Ability Settings > Ability Start Animation

- **Grid Battles**
   Select: *No*

Copy *Battle Animation 0* and change the copy's settings.

- **Schematic Asset**
   Select: *GridRotateToTarget*.
- **Grid Battles**
   Select: *Yes*

### Ability Settings > Ability End Animation

- **Grid Battles**
   Select: *No*

### Item Settings > Item Start Animation

- **Grid Battles**
   Select: *No*

Copy *Battle Animation 0* and change the copy's settings.

- **Schematic Asset**
   Select: *GridRotateToTarget*.
- **Grid Battles**
   Select: *Yes*

### Item Settings > Item End Animation

- **Grid Battles**
   Select: *No*

## Save Changes

And that's it.

Don't forget to save your changes by clicking on *Save Settings* at the bottom of the editor.

# Move Range HUD (Optional)

We also want to display the remaining move range of the current combatant.

Follow [this move range HUD tutorial](https://orkframework.com/guide/ork4/ork4-tutorials/ork4-ui-tutorials/ork4-unity-ui-move-range-hud/) to set it up.

 

The next part of the grid mini-series will set up [larger use ranges](https://orkframework.com/guide/ork4/ork4-tutorials/ork4-gameplay-tutorials/ork4-grid-07-use-and-affect-ranges/) for magic spells and also add affect ranges for magic attack spells.
