---
title: Body Part Weakpoint
description: "Add a body part to your combatants to create a weakpoint. Body parts are individual combatants that are part of another combatant. They can be added either directly in a combatant's setup or added via battle AI or schematics in…"
url: "https://orkframework.com/guide/ork3/ork3-tutorials/gameplay-bits/body-part-weakpoint/"
updated: "2026-07-08"
category: ORK 3 Tutorials / Gameplay Bits
---

# Body Part Weakpoint

Add a body part to your combatants to create a weakpoint.

Body parts are individual combatants that are part of another combatant. They can be added either directly in a combatant's setup or added via battle AI or schematics in a running game. They're placed on the game object of their parent combatant and will be removed from the game/battle when their parent combatant dies.

A body part has it's own status and can be targeted individually as any other combatant. You can also set it up as an active or passive combatant, i.e. a body part can either use actions and participate in battle, or just serve as another target without doing anything.

When a body part is killed, it can inflict status changes on it's parent combatant, e.g. add a status effect or change it's status values. You can learn more about body parts in [the combatant documentation](https://orkframework.com/guide/documentation/status/combatants/).

In this tutorial, we'll set up a simple *weakpoint* body part that'll have just a small amount of health. Killing it will stun it's parent combatant and also set it's health to 1, bringing it close to death.

This tutorial is based on the [3D RPG Quickstart](https://orkframework.com/guide/tutorials/3d-rpg-quickstart/start-3d-rpg-quickstart/) tutorial series, but you can use this for any kind of project.

# Adding Weakpoint Combatant

We'll start with setting up the combatant for the weakpoint. As said, body parts are combatants.

The weakpoint will be used as a passive combatant, i.e. we don't need to set up anything beside the health of the combatant.

Open the Makinom editor, navigate to **Combatants > Combatants** and add a new combatant.

## Content Information

- **Name**
   Set to: *Weakpoint*

### Prefab Settings

We won't use a prefab for this combatant, but you can use a combatant's prefab even when using it as body part (more on that below when setting up the body part).

## Status Settings > Status Value Settings

We won't use a status development and simply set up the health, ignoring all the rest of the status values. When not using status development or adding a start value for a status value, the status value will use the default start value defined in it's settings (e.g. 1 for most of the status values in the tutorial project).

### Start Values

Click on *Add Initial Value*.

- **Status Value**
   Select *Max HP*.
- **Start Value**
   Set to *5*.
- **Set In**
   Select *Value*.

And that's it for the body part. The rest is set up when adding it to a combatant.

## Inventory & Equipment

Body parts can also drop loot (and give experience) when killed. We don't want that for this body part, so we'll replace the default setup from the general settings with dropping nothing.

### Start Inventory

- **Replace Default**
   *Enable* this setting.

### Loot Settings

- **Replace Default**
   *Enable* this setting.

## Battle Settings > Override Settings > Battle Animations

We'll override the default death animation, since our body part doesn't need to animate it's death. However, you can still use them if needed.

Click on *Add Battle Animation*.

- **Action Type**
   Select *Death*.

No further settings needed, this'll override it with not using a schematic to animate death.

# Adding a Body Part

With our body part combatant set up, we can now add it as a body part to other combatants.

I'll add it to the *Snake* combatant, but the setup is the same for any combatant (except for where to place it, if you want to add it to a child object).

Select the *Snake* combatant and change the following settings.

## Status Settings > Body Parts

Body parts defined here (or in the general settings for all combatants) will be added to a combatant when it's initialized, e.g. when spawned in battle or added to the player group.

Beside this, you can also add and remove body parts as part of a battle AI or schematic using *Add Combatant Body Part* and *Remove Combatant Body Part* nodes. This can e.g. be used to add or remove body parts as part of an ongoing battle, e.g. the weakpoint being exposed by a special attack or after the combatant's health dropped below 50%, etc.

For our tutorial setup, we'll just have the weakpoint available from the start.

Click on *Add Body Part*.

- **Base Combatant**
   Select *Weakpoint*.
   This is the combatant that's used for the body part.

The default setup for a body part uses it as a passive combatant and doesn't learn any abilities, adds nothing to the inventory, etc. - which is already set up as we need it. Let's still take a look at the most important settings for this:

- **Is Passive**
   *Enable* this setting.
   The body part is passive and doesn't participate in battle (i.e. it's still available as target, but doesn't use any actions).
- **Must Defeat**
   *Disable* this setting.
   Killing the body part isn't required to end the battle.
   If the combatant's parent combatant (i.e. the *Snake* in this setup) is killed, the body part will be removed in any case.

### Game Object

These settings define where or how the body part is spawned.

The body part can be added to a combatant's game object in 3 ways:

- **Parent**
   Simply adds the needed components to the parent combatant's game object.
   Using this requires to use a child object, otherwise the body part can't be added (conflicts with the parent combatant on the game object).
- **Empty**
   Creates an empty game object and mounts it to the parent.
   We'll use this option.
- **Prefab**
   Spawns the body part combatant's prefab and mounts it to the parent.

Also, keep in mind that the body part combatant's death settings are also used, i.e. they define if a spawned prefab will be destroyed when the combatant dies.

As said, we'll use the *Empty* option for the body part's game object. This is the best way to not use a separate prefab for a body part but be independent of the child object's rotation the body part is placed on.

- **Body Part Object**
   Select *Empty*.
- **Child Object**
   Select *Path*.
- **Find Child**
   Set to: *Head*
- **Use Rotation**
   *Disable* this setting.

This'll add the weakpoint to the snake's head.

### Death Status Changes

These settings allow us to change the status of the parent combatant when the body part dies.

We'll add a stun status effect and set the parent's HP to *1*.

- **Remove On Death**
   *Enable* this setting.
   This'll remove the body part from it's parent when it dies.

Click on *Add Status Change*.

- **Change Type**
   Select *Status Effect*.
- **Change**
   Select *Add*.
- **Status Effect**
   Select *Stun*.

Click on *Add Status Change* again.

- **Change Type**
   Select *Status Value*.
- **Status Value**
   Select *HP*.
- **Operator**
   Select *Set*.
- **Change In**
   Select *Value*.
- **Change Value**
   Select *Value > Value*.
   Set the value to *1*.

That's all there is to adding a body part.

# Save Changes

And that's it - click on *Save Settings* to save the changes.

# Testing

Hit play and go fight a snake.

 [https://orkframework.com/wp-content/uploads/ork3_tutorial_gameplay_bits__weakpoint_body_part.mp4](https://orkframework.com/wp-content/uploads/ork3_tutorial_gameplay_bits__weakpoint_body_part.mp4)

The body part is available as a target.

Attacking it will most likely kill it in one hit, stunning the snake and dropping it's HP to 1.

 

This is just a small example for using body parts, let your fantasy run wild on what you can do with them!
