---
title: 10 Fighter Setup
description: "In this tutorial we'll continue setting up our player's combatant - the fighter. The player will use a status development to level up - we'll just go for a simple system with status curves and a maximum level of 10.…"
url: "https://orkframework.com/guide/ork3/ork3-tutorials/3d-rpg-quickstart/10-fighter-setup-2/"
updated: "2026-07-08"
category: ORK 3 Tutorials / 3D RPG Quickstart
---

# 10 Fighter Setup

In this tutorial we'll continue setting up our player's combatant - the fighter.

The player will use a status development to level up - we'll just go for a simple system with status curves and a maximum level of 10.

We'll set up:

- more animations
- fighter's status development
- default base attack
- fighter combatant

Let's get to it.

# Animations

We'll start with setting up the rest of the animations we'll need for all of our combatants.

Open the Makinom editor and navigate to **Base/Control > Animations**, we'll add multiple new animation settings.

## 1: Battle Movement

We'll use these animations to override idle and run animations in battle for our player combatants.

### Base Settings

- **Name**
   Set to: *Battle Movement*
- **Random First Start Time**
   *Enable* this setting.

### Legacy Settings > Legacy Animation 0

Click on *Add Legacy Animation*.

- **Animation Type**
   Select *Idle*.
- **Animation Name**
   Set to: *IdleBattle*
- **Set Layer**
   *Enable* this setting.
- **Animation Layer**
   Set to *-1*.

We'll use the default *Play Settings* for all our animations, they're:

- **Play Type**
   Select *Cross Fade*.
- **Play Mode**
   Select *Stop Same Layer*.
- **Fade Length**
   Set to *0.1*.

### Legacy Settings > Legacy Animation 1

Copy *Legacy Animation 0* and change the following settings.

- **Animation Type**
   Select *Run*.
- **Animation Name**
   Set to: *RunBattle*
- **Animation Layer**
   Set to *0*

## 2: Simple Movement

A simplified movement animation with just idle and run, as not all of our combatants have walk animations.

### Base Settings

- **Name**
   Set to: *Simple Movement*
- **Random First Start Time**
   *Enable* this setting.

### Legacy Settings > Legacy Animation 0

Click on *Add Legacy Animation*.

- **Animation Type**
   Select *Idle*.
- **Animation Name**
   Set to: *Idle*
- **Set Layer**
   *Enable* this setting.
- **Animation Layer**
   Set to *-1*.

### Legacy Settings > Legacy Animation 1

Copy *Legacy Animation 0* and change the following settings.

- **Animation Type**
   Select *Walk*.
- **Animation Name**
   Set to: *Run*
- **Animation Layer**
   Set to *0*.

### Legacy Settings > Legacy Animation 2

Copy *Legacy Animation 1* and change the following settings.

- **Animation Type**
   Select *Run*.

## 3: Flying Movement

Copy the *Simple Movement* animation setting and change the following settings.

The flying monsters only have an idle animation, so we'll also use that for movement.

### Base Settings

- **Name**
   Set to: *Flying Movement*

### Legacy Settings > Legacy Animation 1

- **Animation Name**
   Set to: *Idle*

### Legacy Settings > Legacy Animation 2

- **Animation Name**
   Set to: *Idle*

## 4: Battle

We'll set up battle related animations, e.g. attack, evade or damage. Not all combatants will have all of these animations - but they'll simply not play them if they don't have them (when using legacy animations). This animation setting will be used by all combatant, some will override some individual animation types.

Add a new animation setting.

### Base Settings

- **Name**
   Set to: *Battle*

### Legacy Settings > Legacy Animation 0

Click on *Add Legacy Animation*.

- **Animation Type**
   Select *Damage*.
- **Animation Name**
   Set to: *Damage*
- **Set Layer**
   *Enable* this setting.
- **Animation Layer**
   Set to *1*.

Copy *Animation 0*, we'll add an additional damage animation - one will be played randomly. If a combatant doesn't have the randomly selected animation, it'll play the first it assigned animation it can find.

- **Animation Name (Animation 1)**
   Set to: *Damage2*

### Legacy Settings > Legacy Animation 1

Click on *Add Legacy Animation*.

- **Animation Type**
   Select *Evade*.
- **Animation Name**
   Set to: *Evade*
- **Set Layer**
   *Enable* this setting.
- **Animation Layer**
   Set to *1*.

### Legacy Settings > Legacy Animation 2

Click on *Add Legacy Animation*.

- **Animation Type**
   Select *Death*.
- **Animation Name**
   Set to: *Death*
- **Set Layer**
   *Enable* this setting.
- **Animation Layer**
   Set to *2*.

### Legacy Settings > Legacy Animation 3

Copy *Legacy Animation 2*.

- **Animation Type**
   Select *Revive*.
- **Animation Name**
   Set to: *PickUp*
   Yeah, we're a bit sneaky here and cross fade to a pick up animation, looks good.
- **Fade Length**
   Set to *0.5*.

### Legacy Settings > Legacy Animation 4

Click on *Add Legacy Animation*.

- **Animation Type**
   Select *Victory*.
- **Animation Name**
   Set to: *Victory*
- **Set Layer**
   *Enable* this setting.
- **Animation Layer**
   Set to *2*.

### Legacy Settings > Legacy Animation 5

Copy *Legacy Animation 4*.

- **Animation Type**
   Select *Attack*.
- **Animation Name**
   Set to: *Attack*

### Legacy Settings > Legacy Animation 6

Copy *Legacy Animation 5*.

- **Animation Type**
   Select *Use*.
- **Animation Name**
   Set to: *Use*

# Status Development

Status developments are used to define how a combatant's status values change upon leveling up. They're optional, but required when a combatant should be able to level up. Learn more about status development in [this documentation](https://orkframework.com/guide/documentation/status/status-values/).

Navigate to **Status > Status Developments**, we'll change the *Default* status development.

## Development Settings

- **Name**
   Set to: *Fighter*

### Level Range

The *Level Range* defines the minimum and maximum level of the status development, and by this the maximum level a combatant using it can reach. As mentioned above, our level range should be 1 to 10.

Click on the *Edit Level Range* button to change them.

- **Minimum Value**
   Set to *1*.
- **Maximum Value**
   Set to *10*.

Click on *Ok* to accept the changes.

## Value Development

Status developments can define values for *Normal* and *Experience* type status values for the defined level range. There are different ways to define how a status value changes, we'll mostly use a *Curve* of defined values.

Click on *Set Default* to add all *Normal* and *Experience* type status values with a base setup.

### Status Value 0: Max HP

- **Development Type**
   Select *Curve*.

Click on *Edit Curve* to open the curve dialogue.

- **Start Value (Min. Level)**
   Set to *100*.
- **End Value (Max. Level)**
   Set to *500*.
- **Interpolation**
   Select *Linear*.

Click on *Generate Curve* to create the curve. Due to the high maximum value of the status value (9999), you'll only see a small curve at the bottom of the window - enable *Bar Highest Value Display* to use the curve's highest value as maximum for the display instead.

Click on *Confirm* to accept the curve.

### Status Value 1: Max MP

- **Development Type**
   Select *Curve*.

Click on *Edit Curve* to open the curve dialogue.

- **Start Value (Min. Level)**
   Set to *10*.
- **End Value (Max. Level)**
   Set to *50*.
- **Interpolation**
   Select *Linear*.

Click on *Generate Curve* to create the curve.

Click on *Confirm* to accept the curve.

### Status Value 2: EXP

- **Development Type**
   Select *Curve*.

Click on *Edit Curve* to open the curve dialogue.

- **Start Value (Min. Level)**
   Set to *0*.
- **End Value (Max. Level)**
   Set to *100*.
- **Interpolation**
   Select *Linear*.

Click on *Generate Curve* to create the curve.

Click on *Confirm* to accept the curve.

### Status Value 3: ATK

- **Development Type**
   Select *Curve*.

Click on *Edit Curve* to open the curve dialogue.

- **Start Value (Min. Level)**
   Set to *10*.
- **End Value (Max. Level)**
   Set to *100*.
- **Interpolation**
   Select *Quadratic > Quadratic In*.
   This gives us a slower increase at the early levels.

Click on *Generate Curve* to create the curve.

Click on *Confirm* to accept the curve.

### Status Value 4: DEF

- **Development Type**
   Select *Curve*.

Click on *Edit Curve* to open the curve dialogue.

- **Start Value (Min. Level)**
   Set to *15*.
- **End Value (Max. Level)**
   Set to *50*.
- **Interpolation**
   Select *Linear*.

Click on *Generate Curve* to create the curve.

Click on *Confirm* to accept the curve.

### Status Value 5: MATK

- **Development Type**
   Select *None*.
   We don't change the fighter's MATK on level ups.
- **Start Value**
   Set to *5*.

### Status Value 6: MDEF

- **Development Type**
   Select *None*.
- **Start Value**
   Set to *10*.

# Combatants General Settings

Next, we'll set up the base attack for all combatants.

Navigate to **Combatants > Combatants > General Settings**.

## Attacks & Abilities

The general settings define the default attacks for all combatants - individual combatants can override them with their own attacks.

Equipment can also override a combatant's attacks, e.g. a bow using a different ability than a sword.

### Default Base Attack

The base attack is the regular ability the combatant will use for the *Attack* command (e.g. in battle menus). It doesn't have to be an attack, it can e.g. also be a healing ability to target allies.

- **Ability**
   Select *Attack*.

### Default Counter Attack

Counter attacks can be used to counter when attacked - abilities that can be countered need to enable this in their *Use Settings*. Countering is chance-baed.

We don't use them in this tutorial series, though, but it's still a good idea to set up the default counter attack.

- **Ability**
   Select *Attack*.

## Animations & Movement > Default Animations

We'll add the *Battle* animations for all combatants. They'll also be available outside of battle.

Click on *Add Animations*.

- **Animations (Animations 2)**
   Select *Battle*.

# Fighter Combatant

And finally, we'll update our player's combatant. We've already set up the prefab and the general settings (which cover e.g. the base attack), but we still need to use our status development.

Navigate to **Combatants > Combatants** and select the *Fighter* combatant.

## Status Settings

The status settings contain all status-related settings of the combatant.

Beside setting a status development and individual status values (that might not be covered by a status development), you can also add status bonuses, set attack/defence modifier start values, add classes and more.

We'll just use the status development we just set up.

### Status Value Settings

- **Has Status Development**
   *Enable* this setting.
- **Status Development**
   Select *Fighter*.

## Animations & Movement > Animations

We'll add the *Battle Movement* animations as animations for battle.

Click on *Add Animations (Battle)*.

- **Animations**
   Select *Battle Movement*.

# Save Changes

And that's it for now.

Save the changes using the *Save Settings* button at the bottom of the editor.

 

Next, we'll set up a [simple battle AI and two enemy combatants](https://orkframework.com/guide/tutorials/3d-rpg-quickstart/11-first-enemies-battle-ai-2/).
