---
title: DUNGEON 04 Traps on Level 3
description: "In this tutorial we'll set up traps and dungeon level 3. This tutorial continues the sub-series for setting up the dungeon. You might have noticed the strange floor plates with holes in some parts of the *Dungeon Level 3* scene…"
url: "https://orkframework.com/guide/ork3/ork3-tutorials/3d-rpg-playground/dungeon-04-traps-on-level-3/"
updated: "2026-07-08"
category: ORK 3 Tutorials / 3D RPG Playground
---

# DUNGEON 04 Traps on Level 3

In this tutorial we'll set up traps and dungeon level 3.

This tutorial continues the sub-series for setting up the dungeon.

You might have noticed the strange floor plates with holes in some parts of the *Dungeon Level 3* scene (open the scene if you haven't already, found in *Assets/Scenes/Dungeon/*). We'll turn them into traps.

Like we did with the trapdoor, we'll make those changes directly on the prefab to have them on all traps in the dungeon.

There are 2 ways to create traps - one involves using *Damage Dealer* (in *Always Active* environmental damage setup) and *Damage Zone* components (learn more about those components in [this documentation](https://orkframework.com/guide/documentation/battles/calculating-action-results/)), the other simply using schematics.

Since we don't use damage dealers/zones in our setup, we'll just use schematics.

# Spike Trap Schematic

Our schematic will activate a child object of the trap's game object (the spikes), damage the player group's health by 10% and disable the spikes again (after a short wait).

The controls will not be blocked, so the trap just activates while the player can continue to move (i.e. we don't need to set that up in the *Settings* node).

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap_schematic.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap_schematic.png)

## Activate Object

*Add Node > Game Object > Game Object > Activate Object*

We'll enable a child object of the trap (*Machine Object*), the *Spikes*.

- **Set Active**
   *Enable* this setting.
- **Object**
   Select *Machine Object*.
- **Child Object**
   Select *Path*.
   We'll define the path to a child object.
- **Find Child**
   Set to *Spikes*.

## Play Sound

*Add Node > Audio > Audio > Play Sound*

We'll play the *Damage* sound type on the player.

- **Object (Play On)**
   Select *Player*.
- **Use Sound Type**
   *Enable* this setting.
- **Sound Type**
   Select *Damage*.
- **Play One Shot**
   *Enable* this setting.

## Change Status Value

*Add Node > Combatant > Status > Change Status Value*

We'll reduce the whole player group's health by 10%.

- **Object (Combatant)**
   Select *Player*.
- **Whole Group**
   *Enable* this setting.
- **Status Value**
   Select *Health Points*.
- **Show Flying Text**
   *Enable* this setting.
- **Set In**
   Select *Percent*.
- **Operator**
   Select *Sub*.
- **Value**
   Select *Value > Value*.
   Set the value to *10*.

## Wait

*Add Node > Base > Wait*

We'll wait for a second before disabling the spikes again.

- **Time**
   Select *Value > Value*.
   Set the value to *1*.

## Activate Object

*Add Node > Game Object > Game Object > Activate Object*

Copy the first *Activate Object* node and change the following setting.

- **Set Active**
   *Disable*this setting.

And that's it for the schematic. Click on *Save Schematic* to save it, e.g. as *SpikeTrap*.

# The Spike Trap Prefab

Select one of the traps (*Trap_Block* game object) in the scene.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap2.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap2.png)

Now, open the trap's prefab to edit it.

We'll add a *Box Collider* (used as trigger) and a *Trigger Machine* component to the prefab.

## Box Collider

Add a *Box Collider* component to the prefab's root game object (*Trap_Block*) using the component menu.

The collider's bounds shouldn't cover the whole trap, so that it only activates when the player moves on it.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap3.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap3.png)

I'm using this setup.

- **Is Trigger**
   *Enable* this setting.
- **Center**
   Set to *X=0, Y=1, Z=0*.
- **Size**
   Set to *X=2.5, Y=2, Z=2.5*.

## Trigger Machine

Add a *Trigger Machine* component to the same game object using the component menu.

Trigger machines start on trigger events, e.g. trigger enter.

### Start Settings

- **Trigger Enter**
   *Enable* this setting.
   Starts when the player enter the game object's trigger.
   Optionally, you can also start it when other game objects enter it (see the *Starting Objects* settings for this).

### Machine Execution Settings

Like with *Interaction Machines* we already used, this defines the schematic we're using in the machine.

- **Schematic Asset**
   Select the *SpikeTrap* schematic.

The rest of the settings can be kept as they are.

That's it for the prefab setup - save the changes and return to the scene (i.e. close editing the prefab).

All traps in the scene now have our setup, let's test it!

# Testing

Hit play directly in the scene and run into a trap.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_spike_trap.png)

It hurts - success!

Let's finish up level 3.

# Dungeon Level 3

We'll add a level zone, item collectors (small key and additional items) and battles.

## Level Zone

Add a level zone either using the scene hierarchy context menu (**ORK Framework > Zome > Level Zone (Scene)**) or the Makinom scene wizard (**Create Game Object > Level Zone (Scene)**).

### Level Settings

- **Use Minimum Level**
   *Enable* this setting.
- **Minimum Level**
   Set to *10*.
- **Set Levels**
   *Enable* this setting.
- **Set Level**
   Select *Player*.
- **Minimum Offset**
   Set to *-1*.
- **Maximum Offset**
   Set to *1*.

## Item Collector (Small Key)

Add an item collector either via the scene hierarchy context menu (**ORK Framework > Item Collector**) or the Makinom scene wizard (**Create Game Object > Item Collector**).

Place the item collector on the crate in the upper center room.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_3_key.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_3_key.png)

### Item Settings > Item 0

- **Item**
   Select *Small Key*.

## Battles

Place battles using the *Combatant Spawner Range* prefab.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_3_enemies.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_3_enemies.png)

Adjust the *Box Collider* of the *Move AI Range* to fit the rooms the battles are placed in, rotate them as needed and select the groups you want to use.

I'm using:

- 2x Physical DPS, 1x Mage
- 1x Tank, 1x Mage, 1x Supporter
- 1x Tank, 2x Physical DPS
- 2x Physical DPS, 1x Supporter
- 1x Physical DPS, 1x Mage
- 2x Physical DPS
- Dragon (single combatant)

The *Dragon* is placed by the small key's item collector. To use a single combatant, change the following setting of the *Combatant Spawner*. Additionally, the battle with the dragon is moved a bit away from the spawner, to have the battle in the center of the room but the enemy sticking to the door.

### Combatant Spawner > Combatant Settings > Combatant 0

Change the used group on the *Combatant Spawner* child object.

- **Use Group**
   *Disable* this setting.
- **Combatant**
   Select *Dragon*.

## Additional Item Collectors

Add some additional item collectors to the scene to have the player something to pick up and enjoy.

You can add item collectors either via the scene hierarchy context menu (**ORK Framework > Item Collector**) or the Makinom scene wizard (**Create Game Object > Item Collector**).

E.g. I'm adding:

- High Potion x2
- High Potion x3
- Magic Potion x3
- Magic Potion x3
- Revive Potion x3
- Revive Potion x3
- Armor 2 x1
- Staff 2 x1
- Regen Charm x1
- Sword 2 x1
- Bow 2 x1
- Gold x300

# Enter Level 4

We'll now update the trapdoor in the level 3 scene to load *Dungeon Level 4* and add a spawn point in front of the trapdoor.

## Scene Changer

Select the *Entrance_Trapdoor_Block* game object in case it's no longer selected.

Adjust the following setting.

### Scene Change Settings > Scene Settings > Target Scene 0

- **Target Scene**
   Set to *Dungeon Level 4*.

## Spawn Point

Create a *Spawn Point* in front of the trapdoor, either using the scene hierarchy context menu (**Makinom > Spawn Point**) or the Makinom scene wizard (**Create Game Object > Spawn Point**).

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_3_trapdoor.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_3_trapdoor.png)

The spawn point automatically receives the spawn ID *1*, since this is the next unused spawn ID. We'll adjust the rotation for our player's spawn.

### Transform

- **Rotation**
   Set to *X=0, Y=-90, Z=0*.

### Spawn Point

- **Use Rotation**
   Enable *Y*, disable *X* and *Z*.

That's it for level 3 - don't forget to save your changes.

# Exit Level 4

Open *Dungeon Level 4* (*Assets/Scenes/Dungeon/*), we'll add a spawn point and scene changer to return to level 3.

## Adding a Game Starter

Don't forget that you need to add a *Game Starter* to a scene if you want to do a quick playtest right in the scene.

Create an *ORK Game Starter* either using the scene hierarchy context menu (**ORK Framework > ORK Game Starter**) or the Makinom scene wizard (**Add ORK Game Starter > Add ORK Game Starter**).

It doesn't really matter where you place the game starter, but make sure to enable *Start Game* for quick game testing.

- **Start Game**
   *Enable* this setting.

## Adding a Spawn Point

Create a *Spawn Point* either using the scene hierarchy context menu (**Makinom > Spawn Point**) or the Makinom scene wizard (**Create Game Object > Spawn Point**).

Place the spawn point in front of the stairs leading upwards - but not too close, as we'll also add a scene changer to the stairs.

### Transform

- **Rotation**
   Set to *X=0, Y=90, Z=0*.

### Spawn Point

- **Use Rotation**
   Enable *Y*, disable *X* and *Z*.

## Adding a Scene Changer

Select the *Entrance_Staircase_Block* game object - you can easily select it by clicking on the arch of the staircase.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_4_exit.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_rpg_playground__dungeon_level_4_exit.png)

The scene changer has to be added to the root game object (*Entrance_Staircase_Block*), not one of it's child objects. Use the component menu to add a *Scene Changer* component.

### Scene Change Settings > Scene Settings > Target Scene 0

- **Target Scene**
   Set to *Dungeon Level 3*.
- **Position Type**
   Select *Spawn ID*.
- **Spawn ID**
   Select *Value > Value*.
- **Value (Spawn ID)**
   Set to *1*.

And that's it for level 4 - don't forget to save your changes.

# Testing

Make a test run of level 3 if you want - maybe increase the player's start level when testing directly in the scene.

Next, we'll go even [deeper into the dungeon](https://orkframework.com/guide/tutorials/3d-rpg-playground/dungeon-05-going-deeper/).
