---
title: 08 HUDs
description: "In this tutorial we'll set up multiple HUDs. We'll set up the following HUDs: - enemy HUD at the enemy's position - player's health HUD in the lower left corner of the screen - player's stamina HUD in the center…"
url: "https://orkframework.com/guide/ork3/ork3-tutorials/3d-action-rpg/08-huds/"
updated: "2026-07-08"
category: ORK 3 Tutorials / 3D Action RPG
---

# 08 HUDs

In this tutorial we'll set up multiple HUDs.

We'll set up the following HUDs:

- enemy HUD at the enemy's position
- player's health HUD in the lower left corner of the screen
- player's stamina HUD in the center of the screen (only shown when stamina isn't full)

Using the *Unity UI* module most of our HUD setup is handled in prefabs.

Let's get to it!

# Enemy HUD Prefab

We'll start with the enemy HUD, it'll display the enemy's name and HP (as a value bar). I recommend setting up UI prefabs in a new scene (or use the *UI Environment* scene you've set up for editing UI prefabs).

## HUD Base

Use the scene hierarchy's context menu to create the base HUD: **Makinom > HUD > HUD (Vertical Layout)**

This creates a canvas, an empty HUD with a vertical layout. We use a *Vertical Layout Group* to arrange the HUD's content in a vertical list.

### Rect Transform

The width of the HUD should already be set to 100, that's what we'll use.

- **Width**Set to *100*.

### Vertical Layout Group

We'll set the padding and spacing all to 0.

- **Padding**
   Set all to *0*.
- **Spacing**
   Set to *0*.

### Content Size Fitter

Add a *Content Size Fitter* component using the component menu.

- **Vertical Fit**
   Select *Preferred Size*.

## Name

Use the scene hierarchy context menu on the *HUD* game object to add an ORK status text content: **ORK Framework > HUD > Content > Status Text Content**

### ORK HUD Status Text Content

This component handles the content that will be displayed.

It's already set up as we need it, displaying the name (via *<name>* text code) of the combatant.

### TextMeshPro - Text (UI)

This component handles displaying the text, we'll adjust it to our needs.

- **Font Size**
   Set to *14*.
- **Alignment**
   Select *Center*.
- **Wrapping**
   Select *Disabled*.

## HP

Use the scene hierarchy context menu on the *HUD* game object to add a status value with a value bar: **ORK Framework > HUD > Status Value > Status Value with +- changes - Name+Value+Bar (single)**

This'll add more than we need, remove the following child objects from the *Status Value* game object:

- Name
- Value

That leaves us with the *Value Bar* child object.

Select the *Status Value* game object.

### HUD Status Value

This defines the status value that will be displayed.

- **Status Value**
   Select *HP*.

### Layout Element

Add a *Layout Element* component using the component menu.

We'll need this to define the height the value bar will have in the vertical layout.

- **Preferred Height**
   *Enable* this setting.
   Set the value to *5*.

### Empty Sprite

Select the *Status Value > Value Bar > Empty Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.

### Positive Change Sprite

Select the *Status Value > Value Bar > Positive Change Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.
- **Color**
   Select a light green color with full alpha.
   E.g. I'm using this hexadecimal color code: *96FF96*

### Negative Change Sprite

Select the *Status Value > Value Bar > Negative Change Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.
- **Color**
   Select a yellow color with full alpha.
   E.g. I'm using this hexadecimal color code: *FFC700*

### Value Sprite

Select the *Status Value > Value Bar > Value Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.
- **Color**
   Select a red color with full alpha.
   E.g. I'm using this hexadecimal color code: *FF0000*

The finished HUD will look like this:

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__enemy_hud.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__enemy_hud.png)

## Create Prefab

You might be wondering about the placement of the HUD. We'll use the enemy's on-screen position for that, it'll be placed using the HUD's pivot, i.e. in our HUD the (default) center pivot position.

Create a prefab out of the HUD, e.g. save it as *Enemy HUD*.

You can remove the *HUD* game object from the scene (but keep the canvas).

# Player Health HUD Prefab

Next, we'll create the prefab for the player's health HUD.

## HUD Base

Use the scene hierarchy's context menu to create the base HUD: **Makinom > HUD > HUD**

This time we'll create a HUD without any layout.

### Rect Transform

Change the settings in the following order.

Select the *bottom left* anchor preset.

- **Pivot**
   Set to *X=0, Y=0*.
- **Pox X**
   Set to *50*.
- **Pos Y**
   Set to *50*.
- **Width**Set to *400*.
- **Height**
   Set to *36*.

## HP

Use the scene hierarchy context menu on the *HUD* game object to add a status value with a value bar: **ORK Framework > HUD > Status Value > Status Value with +- changes - Name+Value+Bar (single)**

Select the *Status Value* game object.

### Rect Transform

We'll change it to fill out the whole HUD.

Select the *stretch stretch* anchor preset.

- **Left**
   Set to *0*.
- **Top**
   Set to *0*.
- **Right**
   Set to *0*.
- **Bottom**
   Set to *0*.

### HUD Status Value

This defines the status value that will be displayed.

- **Status Value**
   Select *HP*.

## Border Image

Add an empty game object to the *Status Value* game object and place it between the *Value Bar* and the *Name* child objects.

We'll use it to display an image acting as the border of the value bar. The text (name, value) should be visible in front of it, the bar behind it.

Rename the game object to *Border Image*.

### Rect Transform

Select the *stretch stretch* anchor preset.

- **Left**
   Set to *0*.
- **Top**
   Set to *0*.
- **Right**
   Set to *0*.
- **Bottom**
   Set to *0*.

### Image

Add an *Image* component using the component menu.

- **Source Image**
   Select *SimpleMaskBar_Border*.

## Name, Value

The *Name* and *Value* child objects of the *Status Value* game object are already set up as we need them.

## Mask

Add another empty game object to the *Status Value* game object and place it above the *Border Image* child object.

Rename the game object to *Mask*.

This game object will serve as a mask, hiding parts of the value bar (we'll parent it to this game object after we're done with it's setup).

### Rect Transform

Select the *stretch stretch* anchor preset.

- **Left**
   Set to *0*.
- **Top**
   Set to *0*.
- **Right**
   Set to *0*.
- **Bottom**
   Set to *0*.

### Mask

Add a *Mask* component using the component menu.

### Image

Add an *Image* component using the component menu.

- **Source Image**
   Select *SimpleMaskBar_Mask*.

Move the *Value Bar* child object and parent it to the new game object. You'll see that parts of the value bar are now hidden.

## Value Bar

All that's left to do is set up the value bar's sprites.

### Empty Sprite

Select the *Value Bar > Empty Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.

### Positive Change Sprite

Select the *Value Bar > Positive Change Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.
- **Color**
   Select a light green color with full alpha.
   E.g. I'm using this hexadecimal color code: *96FF96*

### Negative Change Sprite

Select the *Value Bar > Negative Change Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.
- **Color**
   Select a red color with full alpha.
   E.g. I'm using this hexadecimal color code: *FF0000*

### Value Sprite

Select the *Value Bar > Value Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.
- **Color**
   Select a green color with full alpha.
   E.g. I'm using this hexadecimal color code: *00FF00*

The finished HUD will look like this:

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__player_health_hud.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__player_health_hud.png)

## Create Prefab

Create a prefab out of the HUD, e.g. save it as *Player Health HUD*.

You can remove the *HUD* game object from the scene (but keep the canvas).

# Player Stamina HUD Prefab

Our last HUD prefab to set up is for the player's stamina HUD.

## HUD Base

Use the scene hierarchy's context menu to create the base HUD: **Makinom > HUD > HUD**

We'll create a HUD without any layout again.

### Rect Transform

The HUD should already be placed using a *middle center* anchor preset. We'll display it slightly above the center and reduce it's size.

Select the *middleft* anchor preset.

- **Pox X**
   Set to *0*.
- **Pos Y**
   Set to *100*.
- **Width**Set to *50*.
- **Height**
   Set to *50*.

### Image

Add an *Image* component using the component menu.

The base of the HUD will serve as a mask.

- **Source Image**
   Select *SmallMaskBar_Round*.

### Soft Mask

Add a *Soft Mask* component using the component menu.

This uses the [SoftMaskForUGUI](https://github.com/mob-sakai/SoftMaskForUGUI) available under the MIT license.

We can keep the settings as they are.

## Stamina

Use the scene hierarchy context menu on the *HUD* game object to add a status value with a value bar: **ORK Framework > HUD > Status Value > Status Value - Name+Value+Bar (single)**

This'll add more than we need, remove the following child objects from the *Status Value* game object:

- Name
- Value

That leaves us with the *Value Bar* child object.

Select the *Status Value* game object.

### Rect Transform

We'll change it to fill out the whole HUD.

Select the *stretch stretch* anchor preset.

- **Left**
   Set to *0*.
- **Top**
   Set to *0*.
- **Right**
   Set to *0*.
- **Bottom**
   Set to *0*.

### HUD Status Value

- **Status Value**
   Select *Stamina*.

### Empty Sprite

Select the *Value Bar > Empty Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.

Add a *Soft Maskable* component to the *Empty Sprite* child object. This component is needed for the soft mask to work on the image.

### Value Sprite

Select the *Value Bar > Value Sprite* child object, we'll adjust the *Image* component.

- **Source Image**
   Select *White_16x16*.
- **Color**
   Select a yellow color with full alpha.
   E.g. I'm using this hexadecimal color code: *FFFF00*
- **Fill Method**
   Select *Radial 360*.
- **Fill Origin**
   Select *Top*.
- **Clockwise**
   *Dislabe* this setting.

Add a *Soft Maskable* component to the *Value Sprite* child object.

The finished HUD will look like this:

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__player_stamina_hud.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__player_stamina_hud.png)

## Create Prefab

Create a prefab out of the HUD, e.g. save it as *Player Stamina HUD*.

We're done with our prefabs - you can now remove the canvas (in case you worked in the game's scene).

# HUD UI Layer

Open the editor and navigate to **UI > UI Layers**, we'll add a new layer for our HUDs.

- **Name**
   Set to *HUDs*.

Drag the *HUDs* layer in the list above the *Screen Fader* layer, i.e. the order is:

- Flying Texts
- Layer 1
- HUDs
- Screen Fader

# HUD Animations

Navigate to **UI > HUDs > General Settings**, we'll set up default UI animations for all our HUDs.

## Default Schematics

We'll use schematics to fade in/out our HUDs. If you haven't set them up yet, see [this tutorial](https://orkframework.com/guide/tutorials/schematics/open-and-close-ui-animations/) (or download them there).

- **Before Open Schematic**
   Select *UIFadeIn*.
- **Wait**
   *Enable* this setting.
- **Before Close Schematic**
   Select *UIFadeOut*.
- **Wait**
   *Enable* this setting.

# HUD Setup

Navigate to **UI > HUDs**, we'll change the *Default* HUD and add additional HUDs.

## 0: Player Health

First, we'll set up the player's health HUD.

### HUD Settings

- **Name**
   Set to *Player Health*.
- **HUD Type**
   Select *Combatant*.
- **Auto Display**
   *Enable* this setting.
   This will automatically show the HUD. If you use a HUD only as a  template, make sure to disable this setting.

### Combatant Settings

- **Only Leaders**
   *Enable* this setting.
   This'll display the HUD only for the player combatant itself (we only have one in this game anyway).
- **Player**
   *Enable* this setting.

### Display Conditions

You can use these settings to only show the HUD based on conditions. We'll not use this for this tutorial.

### Unity UI

- **UI Layer**
   Select *HUDs*.
- **HUD Prefab**
   Select the *Player Health HUD* prefab.

## 1: Player Stamina

Copy the *Player Health* HUD.

### HUD Settings

- **Name**
   Set to *Player Stamina*.

### Display Conditions > Combatant Requirements

The stamina will use a display condition - only showing when the stamina isn't full.

Click on *Add Status Condition*.

- **Condition Type**
   Select *Status*.
- **Status Needed**
   Select *Status Value*.
- **Status Value**
   Select *Stamina*.
- **Used Value**
   Select *Display Value*.
   Since our stamina uses *count to value*, we'll base this on the displayed value, not the real value.
- **Check In**
   Select *Percent*.
- **Check Type**
   Select *Is Less*.
- **Check Value**
   Select *Value > Value*.
   Set the value to *100*.

### Unity UI

- **HUD Prefab**
   Select the *Player Stamina HUD* prefab.

## 2: Enemy

The enemy HUD is a bit different, add a new HUD.

It'll be displayed at the combatant's game object (they already have a child object added for the HUD's position).

### HUD Settings

- **Name**
   Set to *Enemy*.
- **HUD Type**
   Select *Combatant Object*.
- **Auto Display**
   *Enable* this setting.

### Combatant Settings

- **Enemy**
   *Enable* this setting.
- **Child Object**
   Select *Path*.
   We'll define the path to a child object.
- **Find Child**
   Set to *HUD*.
   This'll use a child object on the combatants named *HUD* to place the HUD.
- **Limit Display Range**
   *Enable* this setting.
   We only display the HUD when the combatant is close enough to the player.
- **Range**
   Select *Value > Value*.
   Set the value to *15*.

### Unity UI

- **UI Layer**
   Select *HUDs*.
- **HUD Prefab**
   Select the *Enemy HUD* prefab.

# Save Changes

And that's it for the HUD setup.

Don't forget to save your changes by clicking on *Save Settings* at the bottom of the editor.

# Testing

Hit play (in the *Scene* scene) and do something.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__huds.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__huds.png)

Attacking or sprinting will show the stamina HUD (and it vanishes when it's full again).

Enemies have a HUD above them when they're close enough - attacking them shows the damage we do in a different color and our own health also works.

Great! You can also finally notice that the stamina system we've set up works - using stamina shortly stops regeneration, kicking back in after a second (until we keep using it).

 

Next, we'll start [rolling on the floor](https://orkframework.com/guide/tutorials/3d-action-rpg/09-rolling-on-the-floor/)!
