---
title: 02 Player Setup
description: "In this tutorial we'll set up the player and take our first steps in the game. Our player combatant's name is *Ellen* - from Unity's 3D Game Kit assets. Say hello to Ellen: [![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen.png) We'll set up the following things: -…"
url: "https://orkframework.com/guide/ork3/ork3-tutorials/3d-action-rpg/02-player-setup/"
updated: "2026-07-08"
category: ORK 3 Tutorials / 3D Action RPG
---

# 02 Player Setup

In this tutorial we'll set up the player and take our first steps in the game.

Our player combatant's name is *Ellen* - from Unity's 3D Game Kit assets. Say hello to Ellen:

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen.png)

We'll set up the following things:

- player/camera controls
- Ellen's animations
- Ellen's combatant
- initial scene setup (game starter, spawn point)
- start schematic

Let's get to it!

# Game Controls

Navigate to **Base/Control > Game Controls**, we'll set up the player and camera controls.

Learn more about player/camera controls in [this documentation](https://orkframework.com/guide/documentation/getting-started/player-camera-controls/).

## Player Settings > Collision Camera Settings

First, we'll enable using a *collision camera*, i.e. our camera will try not to go through level architecture.

This uses a raycast from the player to the camera to check if anything is blocking the view.

- **Enable Collision Camera**
   *Enable* this setting.
- **Check Type**
   Select *Cross*.
- **Layer Mask**
   Select only the *Default* layer.
   Click on *Nothing* and on the *Default* layer.
- **Move Toward**
   Set to *0.1*.
   This'll move the camera closer to the player from the position that was hit by the raycast.
- **Player Child Name**
   Select *Path*.
   We'll define a path to a child object.
- **Find Child**
   Set to *Head*.
   This child object will be the target for the camera.

## ORK Control Settings > Player Controls

We'll use ORK's built-in *Button* player control and *Animator Root Motion* for movement.

We'll move using the *WASD* keys, which are already set up for us in a new project.

- **Player Control Type**
   Select *Button*.
- **Move Type**
   Select *Animator Root Motion*.
   This'll forward the move speed to the animator.
   The animator will play movement animations based on the speed, moving the game object via root motion.
- **Forward Speed Parameter**
   Set to *Speed*.
- **Vertical Speed Parameter**
   Remove the text (empty field).
   We're not using this.
- **Grounded Parameter**
   Remove the text (empty field).
   We're not using this.
- **Set Controller Gravity**
   *Enable* this setting.
   We'll use a *Character Controller* component on the player's prefab to add gravity.

The default project setup already has WASD keys set up for our movement input.

- **Use Axis (Vertical Axis)**
   *Enable* this setting.
   We'll use a single input key as axis instead of 2 separate input keys for each direction.
- **Axis Key (Vertical Axis)**
   Select *Vertical Move*.
- **Use Axis (Horizontal Axis)**
   *Enable* this setting.
- **Axis Key (Horizontal Axis)**
   Select *Horizontal Move*.

We'll enable using sprinting, which consumes our *Stamina* status value.

- **Use Sprint**
   *Enable* this setting.
- **Sprint Key**
   Select *Sprint*.
- **Sprint Factor**
   Set to *1.3*.
   I.e. sprinting will increase the move speed by around 30%.
- **Use Energy**
   *Enable* this setting.
- **Energy Consume**
   Select *Value > Value*.
   Set the value to *10*.
   Spriting consume 10 stamina per second.
- **Use Status Value**
   *Enable* this setting.
- **Status Value**
   Select *Stamina*.

## ORK Control Settings > Camera Controls

We'll use the built-in *Mouse* camera control, changing the rotation and height via mouse input.

- **Camera Control Type**
   Select *Mouse*.
- **Child Object**
   Select *Path*.
   We'll define a path to a child object.
- **Find Child**
   Set to *Head*.
   This child object on the player will be the target of the camera.
- **Use Unscaled Time**
   *Enable* this setting.
   The camera isn't affected by time scale changes.
   We'll later stop the time (via time scale 0) while selecting a target for the grenade to throw at, this allows us to still change the camera during this.
- **Distance**
   Set to *5*.
- **Height**
   Set to *3*.
- **Minimum Height**
   Set to *0*.
- **Maximum Height**
   Set to *5*.

The *Mouse/Touch Controls* are already set up as we need it, using the right mouse button to control the camera (holding the button and moving the mouse).

However, we'll change the *zoom factor* to make the changes slower.

- **Zoom Factor (Zoom Settings)**
   Set to *0.2*.

# Animations

Next, we'll set up the animations used by the player's combatant. We're using Mecanim animations, the animator controllers are already set up.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen_animator_controller.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen_animator_controller.png)

The movement animations are handled by a blend tree, which plays them based on the *Speed* parameter that's set via the player controls (as we just set it up).

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen_animator_controller2.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__ellen_animator_controller2.png)

Since this is already handled by our control, we don't need to do anything for the idle/movement animations.

What we need to set up is playing different animations, e.g. attacks or damage. We'll directly play them or crossfade to them.

You can learn more about animations in ORK in [this documentation](https://orkframework.com/guide/documentation/features/animations/).

Navigate to **Base/Control > Animations**, we'll change the *Default* animation setup.

- **Name**
   Set to *Ellen*.

## Mecanim Settings

We'll set up animations for damage, death, attack 1-4, healing and roll.

### Mecanim Animation 0

Click on *Add Mecanim Animation*.

- **Animation Type**
   Select *Damage*.

Adjust the already added *Animation 0*.

- **State Name**
   Set to *EllenHitFront*.
- **Duration Type**
   Select *Animation Clip*.
   We get the duration for the animation from the animation clip used by the state.
   Mecanim doesn't report animation play times, so ORK has to find the duration, either via a defined time or by finding the animation clip by it's name.
- **Use State Name**
   *Enable* this setting.
   Since the state name and the animation clip's name match, we can just use the state name to find the clip for the duration.
   If your own animations are set up differently, you might need to define the name of the animation clip instead.
- **Play Mode**
   Select *Cross Fade*.
- **Transition Duration**
   Set to *0.1*.

We can add multiple animations to an animation type, one of them will be played randomly. We'll use this to play different damage animations.

Copy the *Animation 0* setup.

- **State Name**
   Set to *EllenHitBack*.

Copy the *Animation 1* setup.

- **State Name**
   Set to *EllenHitLeft*.

Copy the *Animation 2* setup.

- **State Name**
   Set to *EllenHitRight*.

### Mecanim Animation 1

Click on *Add Mecanim Animation*.

- **Animation Type**
   Select *Death*.

Adjust the already added *Animation 0*.

- **State Name**
   Set to *EllenDeath*.
- **Duration Type**
   Select *Animation Clip*.
- **Use State Name**
   *Enable* this setting.
- **Play Mode**
   Select *Cross Fade*.
- **Transition Duration**
   Set to *0.1*.

### Mecanim Animation 2

Copy *Mecanim Animation 1*.

- **Animation Type**
   Select *Attack*.
- **State Name**
   Set to *EllenCombo1*.
- **Play Mode**
   Select *Play*.
   We directly play the attack animations instead of fading them.

### Mecanim Animation 3

Copy *Mecanim Animation 2*.

- **Animation Type**
   Select *Attack 2*.
- **State Name**
   Set to *EllenCombo2*.

### Mecanim Animation 4

Copy *Mecanim Animation 3*.

- **Animation Type**
   Select *Attack 3*.
- **State Name**
   Set to *EllenCombo3*.

### Mecanim Animation 5

Copy *Mecanim Animation 4*.

- **Animation Type**
   Select *Attack 4*.
- **State Name**
   Set to *EllenCombo4*.

### Mecanim Animation 6

Click on *Add Mecanim Animation*.

- **Animation Type**
   Select *Healing*.

Adjust the already added *Animation 0*.

- **State Name**
   Set to *EllenIdleLandFast*.
- **Duration Type**
   Select *Animation Clip*.
- **Use State Name**
   *Enable* this setting.
- **Play Mode**
   Select *Cross Fade*.
- **Transition Duration**
   Set to *0.1*.

### Mecanim Animation 7

Copy *Mecanim Animation 6*.

- **Animation Type**
   Select *Roll*.
- **State Name**
   Set to *EllenRoll*.
- **Play Mode**
   Select *Play*.

# Player Faction

Next, we'll set the player's faction, navigate to **Game > Game Settings**.

## ORK Game Settings > Player/Group Settings

- **Default Faction**
   Select *Player*.

# Combatant General Settings

Navigate to **Combatants > Combatants > General Settings**, we'll set up some default settings for all combatants.

## Animations & Movement

We'll set up the default animation system (all use *Mecanim*), movement component (using *NavMesh Agent*) and damage sounds.

### Default Animation System

- **System Type**
   Select *Mecanim*.

### Default Movement Component

The movement component is used by the move AI to move the combatant.

- **Component Type**
   Select *Nav Mesh Agent*.
- **Add Component**
   *Enable* this setting.
   In case a combatant's prefab doesn't have an agent set up (ours do), this'll automatically add one.

### Sound Settings

Click on *Add Sound*.

- **Sound Type**
   Select *Damage*.
- **Audio Clip**
   Select *hit26*.

Copy *Audio Clip 0*.

- **Audio Clip**
   Select *hit27*.

Copy *Audio Clip 1*.

- **Audio Clip**
   Select *hit28*.

Copy *Audio Clip 2*.

- **Audio Clip**
   Select *hit29*.

# Player Combatant

Now it's finally time to set up the player's combatant.

Navigate to **Combatants > Combatants**, we'll change the *Default* combatant.

- **Name**
   Set to *Ellen*.

## Base Settings

- **Combatant Type**
   Select *Default*.
   We don't really need it, but it's always a good idea to have it set.

### Prefab Settings

- **Prefab**
   Select *Ellen Variant*.
   You can find the prefab in *Assets/Tutorial Assets/Prefabs/Combatants/*.

## Status Settings

- **Class**
   Select *Default*.
   We also don't use it, but it'll be set to the first class by default in any case.

### Status Value Settings > Start Values

We're not using any status development, so we'll directly set the status values we want here.

Click on *Set Default*, this adds all *Normal* type status values (e.g. Max HP, ATK, etc.) with their default initial value.

We now only need to adjust the values as we want them. I'll just list the status values and their names here - you need to change the *Start Value* setting of the corresponding status value.

- **Max HP**
   Set to *100*.
- **Max Stamina**
   Set to *100*.
- **ATK**Set to *5*.
- **RATK**
   Set to *1*.
   Not used by the player.

### Status Bonuses

We'll add the *Stamina Regen* status effect as an auto status effect via a custom status bonus.

Auto effects are always added (or removed, based on the setup), giving a combatant unremovable effects or prevent effects from being added.

- **Custom Bonus**
   *Enable* this setting.

Scroll down to the *Auto Status Effects* and click on *Add Status Effect Change*.

- **Change**
   Select *Add*.
- **Status Effect**
   Select *Stamina Regen*.

## Animations & Movement

We'll now add the animations we set up and set up the move speed used by the player.

### Animations

- **Replace Default Animations**
   *Enable* this setting.
   In case we later add default animations to the general settings (**Combatants > Combatants > General Settings**), they'll not affect this combatant.

Click on *Add Animations*.

- **Animations**
   Select *Ellen*.

### Movement > Move Speed

- **Own Move Speed***Enable* this setting.
- **Maximum Speed**
   Set to *15*.
- **Walk Speed**
   Select *Value > Value*.
   Set the value to *3*.
- **Run Speed**
   Select *Value > Value*.
   Set the value to *8*.
- **Sprint Speed**
   Select *Value > Value*.
   Set the value to *14*.

# Save Changes

That's it for the setup in the editor.

Don't forget to save your changes by clicking on *Save Settings* at the bottom of the editor.

# Scene Setup

Open the *Scene* scene (found in *Assets/Scenes/*).

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__scene.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__scene.png)

We'll add an *ORK Game Starter* and a *Spawn Point*.

## Add Game Starter

First, we'll add a game starter to the scene and set it up for quick game testing. We'll go with the *ORK Game Starter* variant.

Game starters are used to initialize your project, without it, you can't access any functionality without causing errors. You can learn more about game starters in [this documentation](https://orkframework.com/guide/documentation/getting-started/game-starters/).

You can either use the scene hierarchy context menu or the scene wizard (e.g. via **CTRL + ALT + W**, or using the Unity menu: **Window > Gaming Is Love > Makinom Scene Wizard**).

I'll use the context menu: **ORK Framework > ORK Game Starter**

The added game starter should already have your *Project* asset set up. Change the following setting in the *ORK Game Starter* component's inspector.

- **Start Game**
   *Enable* this setting.

It doesn't really matter where you place the game starter.

## Add Spawn Point

Next, we'll add a spawn point - we'll spawn in the upper right corner of the scene, on the rocks in front of the door-entrance-thingy.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__player_spawn.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__player_spawn.png)

Like the game starter, you can add a spawn point via the context menu or the scene wizard. The scene wizard has searchable popups for adding game objects or components, which can get very convenient when having to set up multiple things.

I'll use the context menu: **Makinom > Spawn Point**

The spawn point will be placed directly on the ground at the screen's center - and it automatically has the next free *Spawn ID* assigned. Spawn IDs are used to identify a spawn point, so when we (soon) spawn our player using a schematic, that's the spawn ID we'll use.

Since there wasn't a spawn point in the scene before, we'll have the spawn ID *0* assigned.

### Transform

We'll do a small change to the transform - we'll rotate it on the *Y-axis*.

- **Rotation**
   Set to *X=0, Y=180, Z=0*.

### Spawn Point

We'll enable using the spawn point's rotation for the placement.

- **Use Rotation**
   Enable *Y*.

That's it for the scene, save your changes.

# Start Schematic

Back to the editor, navigate to **Schematics** - it's time to set up a schematic we'll use when starting our game.

We'll join *Ellen* to the player group and spawn at the spawn point (spawn ID 0).

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__start_game_schematic.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__start_game_schematic.png)

## Join Group

*Add Node > Group > Group > Join Group*

First, we'll add *Ellen* to the player group.

- **Group Origin**
   Select *Active Player Group*.
   This'll join the combatant to the currently active player group.
- **Get From**
   Select *Combatant*.
   We'll create a new combatant from a defined combatant's settings.
   You could also use combatants of a combatant group setup, a random combatant of a combatant type or an existing combatant (via an object).
- **Combatant**
   Select *Ellen*.

## Spawn ORK Player

*Add Node > Game > Player > Spawn ORK Player*

Now, we'll spawn the player in the scene.

- **Spawn At**
   Select *Spawn Point*.
- **Spawn Point ID**
   Set to *0*.

And that's it for the schematic. Click on *Save Schematic* to save it, e.g. as *StartGame*.

# Start Menu

We don't use a start menu in our game (we just play in this one scene), but we'll need to set up our start schematic.

Navigate to **UI > Start Menu** and change the following settings.

## New Game Settings

- **Start Schematic**
   Select the *StartGame* schematic.

# Save Changes

And that's it - we're ready to take our player for a test walk!

Don't forget to save your changes by clicking on *Save Settings* at the bottom of the editor.

# Testing

Hit play to start your game in the *Scene* scene. Your player will spawn in on the rocks and you can move around using WASD controls.

[![](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__first_walk.png)](https://orkframework.com/wp-content/uploads/ork3_tutorial_3d_action_rpg__first_walk.png)

You can also sprint while holding the shift key and change the camera perspective by holding down the right mouse button and moving the mouse.

 

Next, we'll [set up the player's weapon](https://orkframework.com/guide/tutorials/3d-action-rpg/03-player-weapon/).
